Dawlance AC Installation in Pakistan: Step-by-Step Guide and Tips

Short answer: A good AC installation puts the indoor unit high on an inside wall, the outdoor unit in shade with free air flow, keeps the copper pipe as short as possible, uses proper wiring and ends with a vacuum, leak check and test run. Poor installation is the most common reason a new AC does not cool well.

• Plan the indoor and outdoor positions before the installer arrives.
• Shorter pipe = better cooling and lower bills.
• Use a separate, correctly rated wire and breaker.
• Always ask for a test run before the installer leaves.

Step by step: how a split AC is installed

1. Choose the indoor spot — high on the wall, away from direct sun, with space around it for air.
2. Choose the outdoor spot — in shade if possible, on a strong bracket, with open space for hot air to escape.
3. Drill and fit — a small hole with a slight downward slope so water drains outside.
4. Connect pipes and wires — copper pipes, drain pipe and power cable, insulated and neatly fixed.
5. Vacuum and leak check — removes air and moisture so the gas and compressor work properly.
6. Test run — check cooling (and heating on heat & cool models), drain water and the remote.

What affects the installation cost

• Extra copper pipe beyond the standard length.
• Outdoor bracket, stand or high-rise / difficult wall work.
• New wiring, a breaker or a stabilizer if your supply needs it.
• Moving or re-installing an old AC.

Ask us when you order — we will tell you what is included for your model and city before delivery.

Tips to keep your AC cooling well

• Clean the filters every two weeks in summer.
• Get a service before every summer — see AC maintenance tips.
• Use 26 °C with a ceiling fan for the best comfort and lowest bill.

Dawlance Gallant+ Inverter 45 Floor Standing Air ConditionersRs 291,800Dawlance Mega Flex Inverter 1 Ton (Black) Inverter Split ACRs 125,500Dawlance Chrome+ 1.5 Ton White Inverter Split ACRs 134,500Dawlance Glacier Pro T3 Inverter 2 Ton Inverter Floor Standing ACRs 249,500

See all Air Conditioners with prices →

Quick answers

How long does AC installation take?

A normal split AC installation usually takes a few hours, depending on the wall, pipe length and whether extra wiring or a bracket is needed.

What is the best place to install a split AC?

High on an inside wall for the indoor unit, and a shaded spot with open air flow for the outdoor unit, keeping the pipe between them as short as possible.

AC lagwate waqt kin baaton ka khayal rakhein?

Pipe chhota rakhein, outdoor unit chhaon mein lagwayein, alag wire aur breaker lagwayein, aur installer ke jaane se pehle test run zaroor karwayein.